Gas masks and gas mask related equipmentGas mask equipment and safety gear from a company you can trust

facebook
Click Here to become our friend on Facebook! Coupons & Discounts Codes posted often!
twitter
Click Here to follow us on Twitter!
HOME :: Gas Masks :: SCBA and PAPR Systems : MSA OptimAir HC PAPR System
MSA OptimAir® 6HC Health Care PAPR
The OptimAir 6HC PAPR (Health Care Powered Air-Purifying Respirator) from MSA is specifically designed to protect health care professionals from residual Chemical/Biological/ Radiological Agents, when they are performing First Responder duties during Homeland Security or terrorist situations.

The system features a lightweight, chemical-resistant Tychem SL Hood and belt-mounted blower with two HC CBA/RCA canisters.The canisters contain a pleated high-efficiency (P-100) filter to remove aerosols, radionuclides, and solid particulates; and an impregnated activated carbon bed to adsorb (filter out) gases and vapors. The carbon bed is the same as used in military canisters and is effective against mustard (HD), Sarin (GB), DMMP (a Sarin simulant), HCN, and CK.

The hood, which weighs approximately eight ounces, has a fully adjustable suspension and soft fabric collar for extended-wear comfort. Positive pressure inside the hood keeps contaminants out and eliminates the need for fit testing; so the hood can be worn over eyeglasses, long hair, and beards. Front and rear bibs provide neck-opening protection without restricting arm movement. A wraparound lens helps to minimize claustrophobia and provides excellent visibility.

OptimAir 6HC PAPR Hood kit $789.10 - Order Now
(PAPR kit, Tychem Hood, lithium batteries and 2 HC filters)
OptimAir 6HC PAPR Mask kit $782.10 - Order Now
(PAPR kit, MSA 3100 facepiece, lithium batteries and 2 HC filters)
Optimair 6HC PAPR system is made in the USA by MSA - the leader in safety technology

• Designed specifically for use by ER and other health care providers
during Homeland Security situations.
• Continuous air flow meets or exceeds NIOSH standard
• Entire lightweight PAPR weighs under 6 pounds
• Tychem SL hood weighs only 8 ounces
• Design allows freedom of movement plus optimum protection
• Comfortable, easy to don and use
• Hood is compatibly worn with facial hair and glasses
• No fit testing necessary
• Lithium battery provides 10-year shelf life, 4 hours of wear time
• Approved for High Efficiency, Chlorine, Sulfur Dioxide, Hydrogen Chloride,
Hydrogen Fluoride, Hydrogen Sulfide (escape only)
• More Information: User Manual - HC Hood Bulletin - NIOSH Approval Matrix

Operation: A battery-powered blower unit pulls air through 2 cartridges & delivers a continuous flow of purified air. The OptimAir 6A is designed to provide air flow in excess of the NIOSH required minimum flow rate. Air pressure in the facepiece or hood is higher than the surrounding atmosphere, so that in the event of a small leak in the facepiece/hood seal, air will flow from inside the facepiece or hood to the outside.This positive facepiece pressure is maintained,even under high work rates. The constant flow of air also provides a cooling effect to the wearer’s face.

Belt-mounted Motor/Blower Unit - Has a highly efficient 4.6v long-life motor & threaded connectors for quick & easy attachment of cartridges.

Breathing Tube - A 30” corrugated breathing tube (or a 19” version when used with a hood) connects the blower unit to the facepiece. A coupling nut allows for easy detachment & cleaning of the tube, while a threaded connector on the blower unit further simplifies removal & cleaning.

Facepieces/Hoods - To accommodate the wide range of users and respiratory protection needs, OptimAir 6HC PAPRs are available with either a 3100 facepiece or a Tyvek hood. The Tyvek hood is designed primarily for workers with beards and other physical features that might interfere with the facial seal of a tight-fitting facepiece. It is available in either shoulder- or waist-length versions. Both feature a knit collar for comfort. The hood has a high-performance air distribution system that helps keep the hood lens fog-free. Its disposable outer cover eliminates the inconvenience and expense of cleaning. For added protection, the hood can accommodate a hardhat whenever head protection is required.When a hardhat is not worn,a Simple Hood Suspension System securely holds the hood.


Complete Kits | Gas Mask Selection | Escape Hoods | Gas Filters | Chemical Suits | Boots | Gloves
Police / SWAT Equipment | Emergency Management | Detectors / Meters | First Aid | Emergency Supplies
Legal Info | Old Mask/Filter Info | Mask Buying Guide | Shipping Info | View Cart/Checkout | Site Map