MSA
SafeSite SafeAlert & SafeAlert Plus Alarm
The
SafeALERT and SafeALERT Plus Alarm units, part of the MSA
SafeSite Hazardous Gas Detection System, are transportable,
battery-operated, and provide remote alarm signals at designated
locations around the monitored site. These visual and audible
alarms are used in conjunction with measuring components
of the SafeSite System,
such as the SafeCWA Chemical
Warfare Agent Detector, SafeTOX
Toxic Gas Monitor and SafeVOC Volatile Organic Compounds
Detector.
The SafeALERT and SafeALERT Plus Alarm units provide a red alarm strobe light
and loud horn with alarm, status and fault indicators, as well as latching or
non-latching alarm operation. In addition, the SafeALERT Plus Alarm unit features
a display to view gas concentrations detected by SafeSite System measuring components.
SafeALERT and SafeALERT Plus Alarm units are easily and quickly installed and
may be battery or line-powered. These wireless remote alarms may be used with
or without the SafeCOM Command Center, allowing for a flexible and effective
system.
• Applications include emergency response at public events and mass transit
centers, and perimeter and building protection.
• Operate as integrated units within the wireless MSA SafeSite network
• SafeALERT Plus version displays gas value, alarm, status and fault conditions
of
up to eight network gas sensor modules when used independent ofCommand Center
• Three (3) alarm relays; one (1) fault relay
• Rugged, NEMA4X-type enclosure with red alarm strobe, yellow fault strobe
and horn
• Latching or non-latching alarm operation
• Display locks on alarming device until acknowledged
• Designed for clarity in both low light and bright light
• Uses 110-220 VAC AC power or battery with 12-hour run time
• Simple start-up and operation within compact units
• Easy maintenance, with almost no need to open the units
• Saves you money.Many sites require remote indication of gas levels throughout
the site.
SafeALERT Plus Specifications: Power Input 7-30 VDC; 110-220 VAC, Relay Outputs
Three (3) Alarm Level Relays (SPST), One (1) Fault Relay (SPDT), Contact Rating
5 amps @ 120 VAC, non-inductive, 5 amps @ 30 VDC, non-inductive, DisplayLCD,
Temperature Range -20° to +50°C (-4 to +122°F), Humidity 15 to 95%
RH, non-condensing, Visual Indicators Alarm & Fault strobes, Horn Output
75 db at 5’, Strobe Intensity70 to 90 flashes-per-minute, Red 55 candella
eff./ Amber 230 candella eff., Physical Size 9 x 6 x 5 in. (228.5 x 152.4 x 127
cm), Weight 4.5 lbs. (2.041 kg)
SafeALERT Specifications: Power Input 7-30 VDC; 110-220 VAC, Relay Outputs Three
(3) Alarm Level Relays (SPST), One (1) Fault Relay (SPDT), Contact Rating 5 amps
@ 120 VAC, non-inductive 5 amps @ 30 VDC, non-inductive, Temperature Range -20° to
+50ºC (-4° to +122ºF), Humidity 15 to 90% RH, non-condensing, Visual
Indicators Alarm & Fault strobes, Horn Output 75 db at 5’, Strobe Intensity70
to 90 flashes-per-minute, Red 55 candella eff./ Amber 230 candella eff., Physical
Size 9 x 6 x 5 in. (228.5 x 152.4 x 127 cm), Weight 4.5 lbs. (2.041 kg)
MSA
SafeSite SafeAlert Color Information Brochure (.pdf format)
SafeALERT
Alarm: $4725.00
SafeALERT
Plus Alarm: $6215.00
Click
here for ordering information