SafeCom Command Center
The SafeCOM™ Command Center incorporates an uncomplicated graphical user interface for responders to effortlessly interface with the critical and wide-ranging data collected from the SafeCWA, SafeVOC, and SafeTOX units, and any other selected system devices. A customized screen illustrates the site at hand and conveys live readings of all system devices through wireless communication. The information can be viewed simultaneously by another user’s pc within close proximity allowing the sharing of information to facilitate important decision-making. Utilizing uncomplicated images to provide straightforward facts helps users focus on relevant data for interpretation. All information is encrypted for security and datalogged files can be stored for record keeping or future analysis. More Info...

SafeCWA Chemical Warfare Agent Detector
The SafeCWA™ Detector simultaneously detects nerve and blister agents. The unit categorizes whether the agent is a nerve or blister agent. Surface Acoustic Wavelength (SAW) technology provides selective analysis to avoid false alarms. SafeSite’s SafeCWA unit offers high selectivity of CWA agents, preventing misleading warnings and precluding unnecessary panic and chaos. If there is a CWA present, a qualitative signal will be conveyed to the remote SafeCOM Command Center and SafeALERT Alarm devices in addition to the unit’s discreet display. Stable measurements assure users of protected environments, giving them the confidence they require. The unit is stored in a transportable enclosure and easily mounts onto the enclosure More Info...

SafeAlert & SafeAlert Plus Alarms
The SafeALERT™ and SafeALERT™ Plus Alarm units give responders remote alarm signals at designated locations around the monitored site. The SafeALERT provides audible and visual alarms along with fault indications via a loud horn and strobe light. The SafeALERT Plus Alarm adds an LCD display to provide actual gas concentrations from the measuring devices. SafeALERT and SafeALERT Plus Alarms operate independently of the SafeCOM Command Center, allowing for effective system alarm capability for those who elect not to make use of the SafeCOM Command Center. More Info...

SafeVOC Volatile Organic Compound Monitor
The SafeVOC™ Monitor detects numerous potentially hazardous volatile organic compounds (VOCs) covering multiple chemicals such as benzene, toluene, vinyl chloride, arsine, propylene oxide, xylene and many others. The SafeSite VOC unit uses a Photo Ionization Detector (PID) to allow responders to detect low levels of these potentially toxic chemicals before they become a major threat.With its ability to monitor for a large array of substances and indicate if a chemical is present, the SafeVOC Monitor provides knowledge of a hazard to users via a wireless signal. A large LED display, sizeable strobe and loud alarms indicate alarm conditions to clearly communicate the presence or threat of a hazardous environment. Responders can elect to turn off all remote alarms except for the SafeCOM Command Center location. More Info...

SafeTox Toxic Gas Monitor
The SafeTOX™ Toxic Gas Monitor detects toxic industrial chemicals (TICs) such as ammonia, chlorine, hydrogen cyanide or hydrogen chloride. Combustible gas or oxygen sensors are also available. The SafeTOX unit allows responders to detect low levels of these potentially toxic chemicals before they become a major threat. A large LED display, sizeable strobe and loud alarms indicate alarm conditions to clearly communicate the presence or threat of a hazardous environment. Responders can elect to turn off all remote alarms except for the SafeCOM Command Center location. More Info...

RF Signal Strength Tester
SafeTEST™ RF Signal Strength Tester handheld units ensure correct setup of the SafeSITE Network. The SafeTEST Unit confirms the devices deployed in the SafeSITE Wireless System are properly located for optimized wireless communication.